📦 Trépans DTH
Taillant bouton DTH K50
Model: K50
Veuillez demander de l'aide si vous avez des exigences particulières ; nous disposons d'ingénieurs dédiés et expérimentés qui comprennent que certaines conditions de forage peuvent nécessiter une configuration de boutons différente. Celle-ci peut être conçue et fabriquée pour répondre à votre besoin spécifique.
Technical Specifications
| Modèle | K50 |
Product Details
Technical Selection
Key parameters for matching this machine to your job. Send us your hole diameter, depth and rock condition and our engineers will confirm the right configuration.
Modèle
K50
Not sure this model fits? Tell us the hole diameter and depth — we will confirm the matching rig, compressor and hammer.
Check with an engineerKey Advantages
5-inch (127 mm) DTH drill bit for mining and water well drilling
Premium tungsten carbide buttons for high wear resistance
Precision-machined spline drive for efficient energy transfer
Optimized flushing holes for fast cuttings removal
Available in flat, convex, and concave face designs
Heat-treated alloy steel body for extended service life
Compatible with standard DTH hammers and drill pipes
Strict quality control and global after-sales support
Similar Models in This Category
This model is unique in its series — here are similar models from the same category.
| ☑ | Model | Model | Type | Size | Application | Material | Inquire |
|---|---|---|---|---|---|---|---|
| K50This model | K50 | DTH Drill Bit (Button Bit) | 5 inch (127 mm) shank, 130-140 mm diameter | Mining, quarrying, water well drilling, construction | Alloy steel body with tungsten carbide buttons | Get a Quote | |
| K10 | K10 | DTH Drill Bit (Down-the-Hole Button Bit) | 90–130 mm diameter (customizable) | Mining, quarrying, water well drilling, construction | Alloy steel body with tungsten carbide buttons | Get a Quote | |
| K3 | K3 | DTH Drill Bit | 76mm - 152mm | Mining, Quarrying, Water Well Drilling | Alloy Steel with Carbide Buttons | Get a Quote | |
| K30 | K30 | DTH Button Bit | 76mm - 152mm (customizable) | Mining, Quarrying, Water Well, Construction | Alloy Steel Body with Tungsten Carbide Buttons | Get a Quote | |
| K4 | K4 | DTH Drill Bit | Φ110 mm (standard); other sizes available | Mining, water well drilling, quarrying, construction | Alloy steel body with carbide button inserts | Get a Quote | |
| K40 | K40 | DTH Button Bit | 76mm - 152mm (3" - 6") | Mining, quarrying, water well drilling, construction | Alloy steel body with tungsten carbide buttons | Get a Quote | |
| K5 | K5 | DTH Button Bit | 130 mm - 152 mm diameter | Mining, quarrying, water well drilling, foundation engineering | Alloy steel body with tungsten carbide buttons | Get a Quote | |
| K6 | K6 | DTH Button Bit | 76mm - 152mm (3" - 6") | Mining, Quarrying, Water Well Drilling, Construction | Alloy Steel Body with Tungsten Carbide Buttons | Get a Quote |
Compare 2–3 models? Tick the boxes and send them together — we will quote each one for you.
Tip: select multiple models and click “Inquire All” — the selected models are added to the quote form automatically, so you get a faster quotation.
Not sure which model fits your project? Send us your working pressure and air demand — our engineers will recommend the right one.
Main Components
- Carbide buttons
- Alloy steel body
- Spline drive shank
- Flushing holes
- Face configuration (flat/convex/concave)
- Retaining ring
- Chuck
- Wear sleeve
Working Principle
The Kaishan K50 DTH drill bit operates as part of a down-the-hole hammer system. Compressed air is fed through the drill pipe to the DTH hammer, which contains a piston that reciprocates at high frequency. The piston strikes the shank of the drill bit, transmitting impact energy to the carbide buttons. Simultaneously, the bit rotates slowly via the drill rig's rotation unit. The combination of impact and rotation causes the carbide buttons to fracture the rock through a combination of crushing and chipping. The flushing holes in the bit direct exhaust air to the hole bottom, lifting cuttings to the surface and cooling the bit. The spline drive ensures efficient torque transmission while allowing the bit to move axially for impact. This mechanism enables high penetration rates in hard rock with minimal energy loss.
Detailed Features
- ▸High penetration rate in hard rock
- ▸Long service life with premium carbide
- ▸Precision spline drive for efficient torque transfer
- ▸Optimized flushing for fast cuttings removal
- ▸Available in multiple face designs
- ▸Heat-treated body for wear resistance
- ▸Compatible with standard DTH hammers
- ▸Strict quality control and testing
Packaging & Shipping
Each Kaishan K50 DTH drill bit is packed in a wooden case or carton with rust-proof protection, then secured on a pallet for shipment. Standard export packaging ensures safe transport by sea or air. For bulk orders, bits are loaded into 20ft or 40ft containers. Delivery time is typically 15-30 days after order confirmation, depending on quantity. Shipping ports include Ningbo, Shanghai, or as per customer request.
After-Sales Service
Kaishan provides a 12-month warranty on the K50 DTH drill bit against manufacturing defects. Our global service team offers 24-hour technical support and spare parts supply. We provide on-site training for proper bit usage and maintenance to maximize performance. A full range of spare parts and accessories is available for timely replacement. Customers can rely on our worldwide distributor network for local support.
Related Insights
Related Projects
Where This Machine Is Used
Is This Rig Right for My Project?
Answer seven questions about your hole, depth and rock — get a matched rig, compressor, hammer, bit and rod.
Need Technical Support?
Request information and get a quote from our engineers.
Recommended System
Rig + air compressor + drilling tools matched to your project. Get pre-matching advice from our engineers.
Configuration d'équipement recommandée
Sélection basée sur les paramètres réels des machines — foreuse, compresseur, marteau, taillant et tige formant un seul système.
CDC-450J
- Plage de diamètre
- 105–350
- Profondeur
- 450 m
Pourquoi ce choix
Adapté aux paramètres de la machine présentée.
LGCY-19/21-21/18
- Pression de service
- 18 bar
- Débit d'air
- 19 m³/min
Pourquoi ce choix
Couvre le besoin d'air de 10 bar / 19 m³/min (nominal 18 bar / 19 m³/min).
K5
- Plage de diamètre
- 135–165
- Débit d'air
- 7–19 m³/min
- Pression de service
- 10+ bar
- Queue de taillant
- K5** / COP54/DHD350
Pourquoi ce choix
La plage 135–165 mm couvre votre besoin de 140–178 mm.
Besoin système: 10 bar / 19 m³/min · 140–178 mm
