Solutions
Drilling solutions by application — each page is a selection guide for one working condition.
⛏️Open-Pit Mining & Bench Blasting
Bench blasting cost is driven by three numbers — hole diameter, bench depth and rock hardness. Pick those first; the rig and the compressor follow from them.
🪨Quarry & Aggregate Drilling
Quarries rarely drill one hole size — they follow the crusher. Match the rig to the feed size and to how often you move it.
💧Water Well Drilling
The chassis decision drives half the operating cost of a water-well business — choose by terrain, transport distance, well depth and hole diameter.
🏗️DTH Foundation & Anchor Piling
Foundation piling pays for diameter, not depth. Pick the hammer and bit to the pile diameter, then size the rig to the reach.
☀️Photovoltaic Pile Driving
Solar farms are priced per pile. Speed per pile and the ability to work across a whole array determine the equipment, not the terrain.
🏔️High-Altitude Drilling & Compression
Above 3,000 m, air density falls and every engine loses power. Equipment must be configured for altitude before it leaves the factory.
🛰️Remote Area & Off-Grid Projects
When there is no grid, service network or road, the equipment must be self-sufficient, easy to repair and simple to transport.
🌋Geothermal Drilling
Geothermal wells are drilled hot, hard and deep. The rig, the hammer and the air package have to be chosen for temperature and rock, not for headline numbers.
⛏️Underground Mining & Tunnelling
Inside a drift, the tunnel sets the ceiling for size, height and ventilation. Production drilling is won by machines that fit the section and stay available.